Campbell CR3000 Micrologger, Руководство оператора

Страница: 550 / 644

Section 11. Glossary
550
Term: precision
A measure of the repeatability of a measurement. Also see Accuracy,
Precision, and Resolution
(p. 563).
Term: PreserveVariables
CRBasic instruction that protects Public variables from being erased when a
program is recompiled.
Term: print device
Any device capable of receiving output over pin 6 (the PE line) in a receive-
only mode. Printers, "dumb" terminals, and computers in a terminal mode fall
in this category.
Term: print peripheral
See print device
(p. 550).
Term: processing instructions
CRBasic instructions used to further process input-data values and return the
result to a variable where it can be accessed for output processing.
Arithmetic and transcendental functions are included.
Term: program control instructions
Modify the execution sequence of CRBasic instructions. Also used to set or
clear flags. See section PLC Control — Overview
(p. 91).
Term: program statement
A complete program command construct confined to one command line or to
multiple command lines merged with the line continuation characters
<space><underscore> ( _). A command line, even with line continuation,
cannot exceed 512 characters.
Term: Program Send command
Program Send is a feature of datalogger support software
(p. 90).
Command
wording varies among software according to the following table: