Campbell CR3000 Micrologger, Руководство оператора

Страница: 47 / 644

Section 4. Quickstart
47
5. The next window displays Available Sensors and Devices as shown in the
following figure. Expand the Sensors folder by clicking on the symbol.
This shows several sub-folders. Expand the Temperature folder to view
available sensors. Note that a wiring panel temperature (PTemp_C in the
Selected column) is selected by default.
FIGURE 5: Short Cut Temperature Sensor Folder
4.6.4.2 Procedure: (Short Cut Steps 6 to 7)
6. Double-click Type T (copper-constantan) Thermocouple to add it into the
Selected column. A dialog window is presented with several fields. By
immediately clicking OK, you accept default options that include selection of
1 sensor and PTemp_C as the reference temperature measurement.
Note BattV (battery voltage) and PTempC (wiring panel temperature)
are default measurements. During normal operations, battery and
temperature can be recorded at least daily to assist in monitoring system
status.
7. In the left pane of the main Short Cut window, click Wiring Diagram. Attach
the physical type-T thermocouple to the CR3000 as shown in the diagram.
Click on 3. Sensors in the left pane to return to the sensor selection screen.
4.6.4.3 Procedure: (Short Cut Step 8)
8. As shown in the following figure, click Next to advance to the Outputs tab,
which displays the list Selected Sensors to the left and data storage tables to
the right under Selected Outputs.