Campbell CR3000 Micrologger, Руководство оператора

Страница: 548 / 644

Section 11. Glossary
548
memory, or c) the transfer of electric power from the CR3000 or a peripheral
to another device.
Term: output array
A string of data values output to final-data memory. Output occurs when the
data table output trigger is True.
Term: output interval
See data output interval
(p. 535).
Term: output processing instructions
See data output processing instructions
(p. 535).
Term: output processing memory
See data output processing memory
(p. 536).
Term: PakBus
A proprietary comms protocol similar to IP
(p. 543)
protocol developed by
Campbell Scientific to facilitate communications between Campbell
Scientific instrumentation. See PakBus — Overview
(p. 82)
for more
information.
Term: PakBusGraph software
Shows the relationship of various nodes in a PakBus network and allows for
monitoring and adjustment of some registers
(p. 551)
in each node. A PakBus
node is typically a Campbell Scientific datalogger, a PC, or a comms device.
See section Datalogger Support Software — Overview
(p. 90).
Term: parameter
Parameter
(p. 548):
part of a procedure (or command) definition.
Argument
(p. 529):
part of a procedure call (or command execution). An
argument is placed in a parameter. For example, in the CRBasic command
Battery(dest), dest is a parameter that defines what argument is to be put in
its place in a CRBasic program. If a variable named BattV is to hold the
result of the battery measurement made by Battery(), BattV is the argument
placed in dest. In the statement
Battery(BattV)