Brother GTX pro Скачать руководство пользователя страница 92

Страница: 92 / 356

Creating print data

5-4-2. Select the ink type

From the [Select Ink:] option, select a combination of inks to be used.

Setup item

Description

[Color+White Ink]

This option enables a color image to be printed out on the mask layer of white ink.

[White Ink Only]

This option enables the white ink only to be used for printing out a monochrome image.

[Color Ink Only]

This option enables a color image to be printed out on a white background or lighter and
pale color background.

[Black Ink Only]

This option enables the black ink only to be used for printing out monochrome image.

Содержание GTX pro





































































































































































































































































































































































Результаты поиска

Содержание GTX pro

Отзывы:

Brother GTX pro, Инструкция по эксплуатации, Страница: 92 / 356

Результаты поиска

Содержание GTX pro

Отзывы: