Brother GTX pro Скачать руководство пользователя страница 197 | Manualshive

Страница: 197 / 356

Brother GTX pro Скачать руководство пользователя страница 197

197

Precautions to keep good printing quality/use printer over the long term

7-1-7. Replacing the fan filter

When a warning message appears in the warning message window, replace the fan filter with a new one.

(1)

Make the gloves which come standard with the printer, as well as a new fan filter, available for use.

(2)

From the menu, select [Maintenance] > [Maintenance Part Clean/Replace], and press

.

(3)

Select [Part with Error/Warning] and press

.

<IMPORTANT>



If any other error or message is displayed on the operation panel or warning message window, follow the message to solve
the problem, then perform the cleaning.

<TIPS>



Pressing

causes the platen to start moving. Do not put anything around the platen.



Pressing

will not move the platen or head if the error and warning displayed are [Fan Filter To Be Replaced] only.

(4)

Follow the on-screen message and turn off the power.

(5)

Remove the fan filter from the main unit of printer.
<NOTE>



For a proper work operation, be sure to wear the printer-provided gloves.

X0332

Fan filter

«
...
195
196
197
198
199
...
»

Содержание GTX pro





































































































































































































































































































































































Отзывы:

Нет отзывов