Brother GTX pro, Инструкция по эксплуатации, Страница: 184 / 356

184
Precautions to keep good printing quality/use printer over the long term
Cleaning suction cap (Use clean stick T)
(1) Wipe the rubber seal and lip of the suction cap with one side of the tip portion of clean stick T in parallel with the
seal.
<IMPORTANT>

Clean the lip of the suction cap with clean stick T. The print head dries and causes an ejection failure if solidified ink
remains.

Do not touch the sponge of the suction cap. The sponge may come off.

Never touch the tip end of clean stick T with your hand. If any sebaceous matter is attached to the wiper, it may result in a
printer malfunction.

The clean stick T used for cleaning the wiper and exhaust cap should be rinsed in the cleaning cup before the next use.
Be sure to use the clean stick T separately for color ink and white ink.

If ink clot floats on surface, remove it using the clean stick T. Do not use tweezers or other sharp objects. Using sharp
objects could damage the suction cap and deteriorate its air tightness, possibly resulting in failure to eject ink-jet droplets.

Be sure not to pinch the rubber seal. If it is damaged, its sealing property will be degraded, which in turn may lead to
non-ejection of ink-jet droplets from the print heads.
X0324
(2) Replace clean stick T with clean stick R, rinse the cleaning cup, and clean the nozzle guard on the color side head.
<IMPORTANT>

Be sure to use the clean stick T separately for white ink and color ink.

The used clean stick T should be disposed of, and should not be reused.

After cleaning the nozzle guard of the color side head, rinse the cleaning cup with pure water, let it dry sufficiently, and store
it so that dust does not get inside.
Rubber seal
Clean stick T
Sponge
Lips
Outer side
Outer side
Sectional view
The outer side of the suction cap does not need to
be cleaned.