Brother GTX pro, Инструкция по эксплуатации, Страница: 41 / 356

41
Installation and preparation
4-2. Power supply of printer
Even when the printer is placed in standby mode, such maintenance as white ink circulation is performed automatically.
PLEASE LEAVE THE PRINTER POWERED ON 24 HOURS A DAY.
<TIPS>

Every time this printer is powered on or off, maintenance operations are performed to keep its print heads in good condition.
Turning on and off the power frequently causes more ink to be consumed because of the maintenance operations. In order to
reduce the ink consumption, it is advisable to keep the power turned on for proper use of the printer.
4-2-1. Turning on the power
Please refer to the Setup Manual, after the unpacking procedures and installation procedures are completed.
Please check the following points, before connecting the power cord to the printer:

Check whether or not the cartridge is correctly installed.

Check whether or not the wiper cleaner and flushing receiver are correctly installed.

Ascertain whether the ink tube is connected to the print head correctly.
K Y
C M
W12 W34
X0313

Ascertain whether the waste ink tube is inserted into the waste ink tank which has been made available.

Ascertain whether the rear cover is put in position.

Ascertain whether there is enough cleaning solvent in the cleaning liquid tank and the tank is mounted correctly
in place.

Ascertain whether the required space (at least approx. 11.8 in. (30 cm)) for the platen to be moved forward is
kept and the min. clearance (7.9 in. (20 cm)) is maintained at the back side of the printer for exhausting air from
the exhaust opening.
Wiper cleaner
Flushing receiver
Cartridge