Brother GTX pro, Инструкция по эксплуатации, Страница: 160 / 356

160
Basic printing procedures
6-7. Executing a printing job
6-7-1. Executing a print job once for a single print medium
(1) Receiving a print data file.
The print button blinks during reception of data. When the data reception is completed, an audible alarm is activated and the print
button illuminates.
As there are two types of audible alarms, make sure the mounted platen matches the platen size of the print data.
<TIPS>

When data of the same platen size as the previous one was received: A notice sound of "ping-pong" is output.

When data of a different platen size from the previous one was received: A notice sound of "ping-pong pan-pong" is output.
(2) Make sure that the print data you want to print out is displayed on the liquid crystal panel, and press the print button
to start the printing.
When the printing is completed, the platen moves to the forward-most position and the sound of "pong" is heard.
<TIPS>

If the print button is pressed when the platen has not moved toward the front, the platen will move toward the front of the
printer, but no print job will be started. In this case, press the print button once again.

Pressing causes the printing to be canceled.
 The printer may shift to low temperature operation mode, when the room temperature is less than 18°C
(64.4°F) and white ink is used.
During low temperature mode, it may take a longer time for print operation and maintenance before starting the print.
Change the low temperature operation setting as needed.
☞ "8-11. Print Operation Settings Under Low Temperature
>>P.234".

High-temperature and low-humidity environment may prolong the maintenance time after completion of printing. If any
warning message about temperature and humidity is displayed, be sure to control the temperature and humidity promptly
so as to conform with the print warranty scope.
☞
"11-1. Apparatus >>P.350"