BENSHAW RSi GX Series, Руководство по оборудованию

Страница: 61 / 168

55
5 - Parameter List
Code
[I/O]
Parameter Name Setting Range
Factory
Default
Adj.
during
run
Page
I25 Input terminal status display
00000000-11111111 (bit
set)
0 Yes 115
I26 Output terminal status display 0-1 (bit set) 0 Yes 115
I27
Filtering time constant for
Multi-function Input terminals
1-7 4 Yes 116
I30 Multi-Step frequency 4
0-400 [Hz]
30.00 Yes
116
I31 Multi-Step frequency 5 25.00 Yes
I32 Multi-Step frequency 6 20.00 Yes
I33 Multi-Step frequency 7 15.00 Yes
I34 Multi-Accel time 1
0-6000 [sec]
3.0
Yes 117
I35 Multi-Decel time 1 3.0
I36 Multi-Accel time 2 4.0
I37 Multi-Decel time 2 4.0
I38 Multi-Accel time 3 5.0
I39 Multi-Decel time 3 5.0
I40 Multi-Accel time 4 6.0
I41 Multi-Decel time 4 6.0
I42 Multi-Accel time 5 7.0
I43 Multi-Decel time 5 7.0
I44 Multi-Accel time 6 8.0
I45 Multi-Decel time 6 8.0
I46 Multi-Accel time 7 9.0
I47 Multi-Decel time 7 9.0
I50 Analog output item select 0-3 0 Yes 118
I51 Analog output level adjustment 10-200 [%] 100 Yes 118
I52 Frequency detection level
0-400 [Hz]
30.00 Yes
119
I53 Frequency detection bandwidth 10.00 Yes
I54
Multi-function output terminal
select
0-18
12 Yes 119
I55 Multi-function relay output 17 Yes 126
I56 Fault relay output 0-7 2 Yes 126
I57 Fault Output Terminal Select 0-3 0 Yes 127
I59 Communication protocol select 0-Modbus RTU 0 No 127
I60 Inverter number 1-32 1 Yes 127
I61 Baud rate 0-4 3 Yes 128
I62
Drive mode select after loss of
frequency command
0-2 0 Yes 128
I63
Wait time after loss of frequency
command
0.1-120 [sec] 1.0 Yes 128
I64 Communication time setting 2-100 [ms] 5 Yes 128