BENSHAW RSi GX Series, Руководство по оборудованию

Страница: 44 / 168

•
To move from the F15 to function group 2
4.2.2 How to Change the Codes in a Group
•
Code change in Drive group
•
Code Jump
When moving from parameter "F 0" to "F23" directly.
38
4 - Operation
1
In F15, press the left (
t
) or right (
u
) key. Pressing the key goes to the
first code of the group.
2
The 1st codein function group 1 "F0" is displayed.
Press the right arrow (
u
) key.
3
The 1st code in function group 2 “H 0” will be displayed.
F 15
H 0
F 0
1
In the 1st code in Drive group “0.00”, press the Up (
p
) key once.
2
The 2nd code in Drive group “ACC” is displayed.
Press the Up (
p
) key once.
3
The 3rd code “dEC” in Drive group is displayed.
Keep pressing the Up (
p
) key until the last code appears.
4
The last code in Drive group “drC” is displayed.
Press the Up (
p
) key again.
5
Return to the first code of Drive group.
z
Note: Use Down (
q
) key for the opposite order.
0.00
ACC
dEC
drC
0.00
1
Press the Ent (
˜
) key in “F 0”.
2
1 (the code number of F1) is displayed. Use the Up (
p
) key to set to 3.
3
“03” is displayed by pressing the Left (
t
) key once to move the cursor
to the left. The numeral having a cursor is displayed brighter. In this
case, 0 is active. Use the Up (
p
) key to set to 2.
4
3 is set.
Press the Ent (
˜
) key once.
5
Moving to F 23 has been complete.
z
Note: Function group 2 and I/O group are settable with the same setting.
F 0
1
F 23
03
23