AudioCodes Mediant 3000 TP-6310, Руководство по мониторингу работы и системе оповещения

Страница: 73 / 158

Version 7.0 73 Performance Monitoring and Alarms
Performance Monitoring and Alarms 3. Alarms
Additional Info1,2,3 Updated DS1 Line Status.
This variable indicates the Line Status of the interface. It contains
loopback, failure, received 'alarm' and transmitted 'alarms' information.
The dsx1LineStatus is a bit map represented as a sum, therefore, it can
represent multiple failures (alarms) and a LoopbackState simultaneously.
dsx1NoAlarm must be set if and only if no other flag is set. If the
dsx1loopbackState bit is set, the loopback in effect can be determined
from the dsx1loopbackConfig object. The various bit positions are:
1 dsx1NoAlarm No alarm present
2 dsx1RcvFarEndLOF Far end LOF (a.k.a., Yellow
Alarm)
4 dsx1XmtFarEndLOF Near end sending LOF
Indication
8 dsx1RcvAIS Far end sending AIS
16 dsx1XmtAIS Near end sending AIS
32 dsx1LossOfFrame Near end LOF (a.k.a., Red Alarm)
64 dsx1LossOfSignal Near end Loss Of Signal
128 dsx1LoopbackState Near end is looped
256 dsx1T16AIS E1 TS16 AIS
512 dsx1RcvFarEndLOMF Far End Sending TS16 LOMF
1024 dsx1XmtFarEndLOMF Near End Sending TS16 LOMF
2048 dsx1RcvTestCode Near End detects a test code
4096 dsx1OtherFailure Any line status not defined here
8192 dsx1UnavailSigState Near End in Unavailable Signal State
16384 dsx1NetEquipOOS Carrier Equipment Out of
Service
32768 dsx1RcvPayloadAIS DS2 Payload AIS
65536 dsx1Ds2PerfThreshold DS2 Performance Threshold Exceeded
Corrective Action -