AudioCodes Mediant 3000 TP-6310, Руководство по мониторингу работы и системе оповещения

Страница: 113 / 158

Version 7.0 113 Performance Monitoring and Alarms
Performance Monitoring and Alarms 3. Alarms
3.4.22 HA System Fault Alarm
HA System Fault Alarm
Description This alarm originates when:

HA feature is active but the system is NOT working in HA mode.
Reason is specified (for example: SW WD exception error, HW WD
exception error, SAT device is missing, SAT device error, DSP error,
BIT tests error, etc).

HA feature is active and the redundant module is in start up mode but
hasn't connected yet

HA system is active
SNMP Alarm acHASystemFaultAlarm
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.33
Alarm Title HA System Fault Alarm
Alarm Source System#0/Module#<m>, where m is the blade module’s slot number
AlarmType qualityOfServiceAlarm
Probable Cause outOfService
Alarm Severity Condition <text> Corrective Action
Critical (default) HA feature is
active but the
system is not
working in HA
mode Fatal exception error
High Availability (HA) was lost
due to
switchover and should
return automatically after a few
minutes. Corrective action is not
required.
TCPIP exception error HA was lost due to switchover
and should return automatically
after a few minutes.
Corrective action is not
required.
Network processor
exception error
(applicable only to
Mediant 3000) HA was lost due to switchover
and should return automatically
after a few minutes.
Corrective action is not
required.
SW WD exception error HA was lost due to switchover
and should return automatically
after a few minutes.
Corrective action is not
required.
HW WD exception
error HA was lost due to switchover
and should return automatically
after a few minutes.
Corrective action is not
required.