119
INSPECTING MUFFLER
NOTE: Whenever a part is worn excessively, cracked,
or damaged in any way, replacement is necessary.
1. Inspect muffler externally for cracks, holes, and
dents.
2. Inspect the muffler internally by shaking the muffler
back and forth and listening for rattles or loose debris
inside the muffler.
NOTE: For additional details on cleaning the muf-
fler/spark arrester, see Periodic Maintenance.
INSTALLING MUFFLER
1. Using a new grafoil seal, place the muffler into posi-
tion engaging the mounting lugs into the grommets;
then slide the muffler forward.
2. Install the two exhaust springs.
Rear Body Panel/Rack
REMOVING
1. Remove the rear rack; then remove two cap screws
securing the rear body panel/fender to the side frame
and the cap screws securing the rear fenders to the
footwells.
KC317A
KC316
2. Disconnect the battery (negative cable first) and
remove from the battery compartment; then discon-
nect the starter relay wires and route the wiring out
of the compartment.
KC322A
3. Remove the auxiliary brake reservoir from the body
but do not disconnect the hose; then route and secure
the hose and reservoir out of the way making sure
not to spill brake fluid.
KC306
4. Using a small screwdriver, remove the light connec-
tors from the frame; then disconnect both connectors
and remove the rear body panel/fender.
KC281
KC279
Manual
Table of Contents
