61
FI655A
9. Install the input driveshaft.
FI646
10. Install the spacer (1), shaft (2), reverse idler gear, and
washer (3).
FI641A
FI645
11. Install the secondary output driveshaft assembly into
the crankcase half making sure the front and rear
bearing alignment pins are seated in the recesses;
then install the center carrier bearing alignment
C-ring.
FI660A
FI659A
FI661A
Joining Crankcase Halves
1. Verify that the two alignment pins (A) are in place
and that both case halves are clean and grease free.
Apply Three Bond Sealant to the mating surfaces.
Place the right-side half onto the left-side half.
Manual
Table of Contents
