API Audio Accessories 7-22-10 Скачать руководство пользователя страница 251

Страница: 251 / 375

just before the chorus starts. The position of the fader when it was released will be

applied back to the start of Timecode and the level of chorus, as well as subsequent
moves, are retained.

UPDATE FROM TOUCH IN UPDATE

Update From Touch: The last positions of channel sections

are applied between the Timecode location when the control

was first changed or touched to the point recording stops:

•

Moves will not be recorded from the point when the

change was made to the point Timecode is

stopped…only the last positions are applied between
the two points

•

Recording can be stopped for faders in Update by

releasing the fader

•

Recording can be stopped in Write mode by stopping

Timecode or changing the mode/submode

•

Update from Touch is useful when seeking the level

of a track during a certain section of a recording
(such as a verse). A fader in Update can be touched

at the beginning of a section and moved until the

proper level is found and then held until the end of a
section. The last position will be applied from the

first touch to the end of recording or when the fader

is released.

•

Update from Touch can be used in Update and Write

modes only

•

Update from Touch has no effect when used in

Manual or Read modes

•

When Update from Touch is engaged on at least one

channel section:

The Update from Touch button on the VCP
illuminates in red

Channel sections have a blue submode box

Содержание 7-22-10
























































































































































































































































































































































































Результаты поиска

Содержание 7-22-10

Отзывы:

Похожие инструкции для 7-22-10

Бренды по названию

Популярные бренды

API Audio Accessories 7-22-10, Руководство оператора

Результаты поиска

Содержание 7-22-10

Отзывы:

Похожие инструкции для 7-22-10

Бренды по названию

Популярные бренды