API Audio Accessories 7-22-10 Скачать руководство пользователя страница 321

Страница: 321 / 375

28.3.1

Setting Up or Changing the Channel Map

To setup or make changes to the Channel Map, perform the following procedure:

Open the “Setup” menu in the Main window and select the “Channel Mapping…”
submenu.

Click the radio button for the Standard Default that matches the size of the console
frame.

Click the “Set Default” button to apply the default settings.

Scroll the Channel Map window and make the modifications necessary to match the

exact hardware installed in the console.

The labeling of channels can be changed if needed by changing the “Alias” field on

the desired channels.

Click the “OK” button once the map is set as needed.

28.4

Timecode Setup

SMPTE Longitudinal Time Code (LTC or VITC) or MIDI Time Code (MTC) is used to synchronize

the Vision automation system with the recorded media.

There are three (3) parameters involved with Timecode setup:

•

Timecode Source: Type and source of Timecode

•

Freewheel Frames: 0-90 Frames

•

MTC Port: Configure a MIDI port for MIDI Timecode

Timecode framerate is selected at the time a new Project is created.

28.4.1

Timecode Source

Three (3) Timecode Sources can be selected:

•

LTC: SMPTE Longitudinal Time Code

•

MTC: MIDI Time Code

•

---- (VITC): SMPTE Vertical Interval Timecode

The source and type of Timecode to be used is selected using the “Timecode Source”
submenu of the Console Settings menu in the ACM.

Use the up and down arrow buttons to select

“Timecode Source” from the Console Settings
menu and press the “Yes OK” button.

Use the up and down arrow buttons to select
the desired source.

Press the “Yes OK” button to accept the set
value. Press the “No Cancel” button to cancel

the operation.

To set the Timecode Source, select “Console
Settings” from the ACM Main Menu and press the

“Yes OK” button. The Console Settings submenu

will open.

Содержание 7-22-10
























































































































































































































































































































































































Результаты поиска

Содержание 7-22-10

Отзывы:

Похожие инструкции для 7-22-10

Бренды по названию

Популярные бренды

API Audio Accessories 7-22-10, Руководство оператора

Результаты поиска

Содержание 7-22-10

Отзывы:

Похожие инструкции для 7-22-10

Бренды по названию

Популярные бренды