API Audio Accessories 7-22-10, Руководство оператора

Страница: 245 / 375

Use Update to record changes over a short period of time or to touch-up existing moves.
Update can also be used as a “Record Ready” mode to prepare selected channels sections
to enter Write mode.
Anytime a channel section is in Write while Timecode is running, existing data is being
erased and new data is being recorded. Changing modes from Update to Write allows the
operator to “punch-in” to the automation data on the selected channel sections. Changing
modes from Write to Read allows the operator to “punch-out” and stop recording new
automation data on the selected channel sections.
Write: Current positions and moves will be recorded over
any existing moves:
• Previously recorded moves are not played back
• Existing moves overwritten
• Fader and switch positions are recorded at all times,
even when faders are not touched
• Recording will continue until Timecode is stopped or
the mode/submode is changed
• Write can be engaged at any time
• Write can be engaged from the VCP and Channel
Control window only if Update is engaged first
• Write can be engaged from Manual or Read without
being in Update using the WRITE button on the
Fader Module
• When Write is engaged on at least one channel
section:
o
The Write button on the VCP illuminates in
red
o
Channel sections are orange in color
o
Both the green Read LED and yellow Update
LEDs on the fader module will illuminate