API Audio Accessories 7-22-10 Скачать руководство пользователя страница 284

Страница: 284 / 375

26.8

Mix Tree

Once a mix has been created in the Automation Control Module (ACM), it can be saved to the

Mix Tree in the Project window.

Click the Mix Tree tab in the Project window to display the Mix Tree.

A Project File must be open in order to save a mix to the Mix Tree. As soon as a mix is saved to

the Mix Tree it is immediately saved to the PC hard-drive.

The Mix Tree displays and manages the mix files for the current project. This includes the

mixes created in the ACM, as well as mixes created using the Mix Tree edit functions.

Once a mix is in the Mix Tree, it can be named, edited, copied, and deleted.

26.8.1

Mix Tree Display

For each mix, the following information is displayed:

•

Mix Icons: Icons that indicated the status of the mix

•

Mix Name: Name of the mix

•

Time: The time and date the mix was created

•

Size: The size of the mix

•

Groups: The number of groups contained within the mix

•

Change: Information regarding the differences between a mix and the mix it was

derived from (duplicate, group added/deleted, off-line trim, etc.)

Содержание 7-22-10
























































































































































































































































































































































































Результаты поиска

Содержание 7-22-10

Отзывы:

Похожие инструкции для 7-22-10

Бренды по названию

Популярные бренды

API Audio Accessories 7-22-10, Руководство оператора

Результаты поиска

Содержание 7-22-10

Отзывы:

Похожие инструкции для 7-22-10

Бренды по названию

Популярные бренды