API Audio Accessories 7-22-10 Скачать руководство пользователя страница 98

Страница: 98 / 375

10.0 Control Group Master Faders

Each group master maybe controlled via the automation system. The system can be set to record the

moves from just the group master or from the group master and group members. Refer to section 26.0

automation system for information pertaining to group automation.

Groups are stored as part of the mix files in the automation system.

Refer to section 25.0 Groups for complete details regarding the setup and operation of groups.

There are six (6) Control Group Masters (GROUP

MASTERS) in the Center Section, located next to

the Vision Automation control panel. These Control
Group Masters do not pass audio, but are designed

to control other faders and mutes on the console.

In addition to the Control Group Master faders, any
other fader (input channels Fader A/B or any

Program master fader) can be assigned as group

masters. Group masters may be assigned to
other group masters to create grand masters (not

the same as the Stereo Program Bus Grand

Master). Assignments are made via Vision software
(see below).

Group masters can control the faders, mutes, and

switches of input channels, as well as the fader of
the Program and Control Group Masters. Moving

the group master fader will cause the group

members to follow the group master, moving
proportionally according to their position and audio

taper. Individual member faders may be

adjusted within the group without affecting the
other group members.

Содержание 7-22-10
























































































































































































































































































































































































Результаты поиска

Содержание 7-22-10

Отзывы:

Похожие инструкции для 7-22-10

Бренды по названию

Популярные бренды

API Audio Accessories 7-22-10, Руководство оператора

Результаты поиска

Содержание 7-22-10

Отзывы:

Похожие инструкции для 7-22-10

Бренды по названию

Популярные бренды