API Audio Accessories 7-22-10 Скачать руководство пользователя страница 58

Страница: 58 / 375

4.2.4 Program Bus Assignments

Channel output assignments may be made to three (3) Stereo Program Busses and one (1)

Surround Program Bus.

Both audio paths, Fader 1 or Fader 2, may feed all Program Busses simultaneously.

IMPORTANT NOTE: The Fader 1 and Fader 2 Pan-pots are not automatically engaged and

must be activated when output assignments are made.

The assignment buttons in the Fader 1 and Fader 2 Program Bus routing sections of the

Output Assignment module function as follows:

NOTE: The Program Bus assignment buttons for Fader 1 and Fader 2 operate identically,

so only one set of assignment buttons is shown here.

NOTE: The Fader 1 and Fader 2 Pan-pots are not engaged by default and must

be activated when output assignments are made.

NOTE: The Fader 1 and Fader 2 Pan-pots always feed the Surround Program

Bus.

The Fader 1 and Fader 2 audio paths

each have a Program Bus Assignment
section. Assignments may be made to

the following Program Busses:

•

ST A: Stereo A

•

ST B: Stereo B

•

ST C: Stereo C

•

5.1: Surround

The Pan-pot in each path may also be

engaged.

ST A (Stereo A): Readies Stereo Program Bus A for assignment

•

Assignments are not made until a channel SET button is pressed

•

A green LED indicator illuminates when selected

ST B (Stereo B): Readies Stereo Program Bus B for assignment

•

Assignments are not made until a channel SET button is pressed

•

A green LED indicator illuminates when selected

ST C (Stereo C): Readies Stereo Program Bus C for assignment

•

Assignments are not made until a channel SET button is pressed

•

A green LED indicator illuminates when selected

PAN: Readies the Left/Right Pan-pot for assignment to the Stereo Program
Busses

•

Facilitates Left/Right panning to the Program Busses

•

Assignments are not made until a channel SET button is pressed

•

A red LED indicator illuminates when selected

Содержание 7-22-10
























































































































































































































































































































































































Результаты поиска

Содержание 7-22-10

Отзывы:

Похожие инструкции для 7-22-10

Бренды по названию

Популярные бренды

API Audio Accessories 7-22-10, Руководство оператора

Результаты поиска

Содержание 7-22-10

Отзывы:

Похожие инструкции для 7-22-10

Бренды по названию

Популярные бренды