API Audio Accessories 7-22-10 Скачать руководство пользователя страница 214

Страница: 214 / 375

25.7.4

Channel or Fader 1 and Fader 2 Selection Grids

The “Channel or Fader 1” and “Fader 2” channel grids allow the selection of Group Masters

and Group Members.

The channel grids have a channel box for Channel or Fader 1 and Fader 2 on channels 1-

48, the Stereo and Surround Program masters (L/R, CTR, LFE, SUR, 5.1, STA, STB, STC,

GM), and the Control Group Master faders (G1-G6).

25.7.4.1 Selection Grid Status Indication

Indications for master and member faders are displayed as follows:

Unselected channel or fader

Selected as the Group Master for the current group

Selected as a Group Member in the current group

Selected as the Group Master for another group

(cannot be changed or selected)

Selected as a Group Member in another group

(cannot be changed or selected)

IMPORTANT NOTE: Once a Group Master or Member is assigned to a group, it

cannot be assigned to another group.

Existing Group Masters and Members can be shown in the Selection Grids by

clicking the Section checkboxes in the Edit Group window.

25.7.4.2 Group Master and Member Selection

When setting up a new group, a Group Master must be selected before the Group

Members. This should take place after the channel sections have been selected.

To select a Group Master, click the desired channel or fader in the grid:

CAUTION: The fader to be designated as the Group Master should not be set at

∞

dB (fader all the way down) when the group is set up. Doing so

will cause the Group Members to slam to the top when the Group

Master moves upward. A typical starting value would be 0dB or

other desired value in the middle of the fader travel.

Содержание 7-22-10
























































































































































































































































































































































































Результаты поиска

Содержание 7-22-10

Отзывы:

Похожие инструкции для 7-22-10

Бренды по названию

Популярные бренды

API Audio Accessories 7-22-10, Руководство оператора

Результаты поиска

Содержание 7-22-10

Отзывы:

Похожие инструкции для 7-22-10

Бренды по названию

Популярные бренды