API Audio Accessories 7-22-10 Скачать руководство пользователя страница 209

Страница: 209 / 375

25.6.2 Edit

Group

25.6.3 Delete

Group

To modify an existing group, highlight the desired group and
select “Edit Group” from the Groups Menu.

The “Edit Group” window will open allowing changes to the
Group Master and Members and the Group Name to be

edited.

Editing a group will result in the creation of a new mix in the
Mix Tree that contains the edited group.

See section 25.7 Edit Group Window for detailed information
about editing groups.

To delete an existing group or groups, highlight the desired

group(s) and select “Delete Group” from the Groups Menu.

A “Delete Groups” warning prompt will open asking for

confirmation to delete the group(s).

Deleting a group will result in the creation of a new mix in the

Mix Tree that does not contain the deleted mix.

Clicking the

button will delete

the group(s).

Clicking

will cancel the

operation and leave the selected group(s)

intact.

Содержание 7-22-10
























































































































































































































































































































































































Результаты поиска

Содержание 7-22-10

Отзывы:

Похожие инструкции для 7-22-10

Бренды по названию

Популярные бренды

API Audio Accessories 7-22-10, Руководство оператора

Результаты поиска

Содержание 7-22-10

Отзывы:

Похожие инструкции для 7-22-10

Бренды по названию

Популярные бренды