API Audio Accessories 7-22-10 Скачать руководство пользователя страница 206

Страница: 206 / 375

25.4 Groups

Window

Groups are setup, modified, and deleted using the Groups window.

The window above shows four (4) groups setup to support a recorded drum set returning on

Fader 1 on channels 1-12 as “Members,” with channel 13 designated as the “Master” channel.

The Groups window can be opened by selecting “Groups” from the View Menu.

The Groups window displays the following information for each group in the list:

•

Name: Group name

•

Type: Group type (Fader, Insert, Mute, or Switch)

•

Master: ID number of the controlling Master Fader/Module

•

Null: Null position for the Master Fader

•

Members: A list of the faders and modules that are group members

Group Members that are faders are indicated as follows:

Fader 1 Group Members

Fader 2 Group Members

Содержание 7-22-10
























































































































































































































































































































































































Результаты поиска

Содержание 7-22-10

Отзывы:

Похожие инструкции для 7-22-10

Бренды по названию

Популярные бренды

API Audio Accessories 7-22-10, Руководство оператора

Результаты поиска

Содержание 7-22-10

Отзывы:

Похожие инструкции для 7-22-10

Бренды по названию

Популярные бренды