API Audio Accessories 7-22-10, Руководство оператора

Страница: 36 / 375

The controls for the Fader 2 audio path are as follows:
NOTE: The Fader 2 input on all channels may be set to TAPE by engaging the
FDR2 TAPE Master Input Selector switch (Input Select) in the Center Section.
TAPE: Selects the Multitrack Return (TAPE) as the active input for Fader 2
• TAPE may be the active input for both faders
• MIC is the default Fader 2 input
• Recall
• A yellow LED indicator illuminates when engaged
INS (Insert): Activates the Fader 2 Insert Return
• The Insert Send is fed pre-fader from the output of the Equalizer
• The Insert Send is always active
• The Insert Return is located PRE the Fader input
• The Insert Return is active only when the INS button is engaged
• Automation
• A green LED indicator illuminates when engaged
FDR1 (Fader 1 Output): Routes the output of Fader 1 to the Fader 2 audio
path
• The Fader 1 output is routed to the Fader 2 audio path POST the
Insert Return and PRE the Phase Reverse.
• It’s useful for creating a LFE feed or an additional Aux Send using
the Fader 2 audio path
• It’s useful for creating stems and bouncing tracks
• Recall
• A green LED indicator illuminates when engaged
Ø (Phase Reverse): Inserts a Phase Reverse (Polarity Inverter) in the
Fader 2 audio path
• Recall
• A red LED indicator illuminates when engaged
TRIM: Sets the amount of pre-fader level Trim (boost)
• 0 to +12dB of gain
• Located Pre-fader, so the added gain is reflected in all post-fader
stages (Aux Sends, Solos, Bus Assignments and Direct Output).
PEAK: A red LED illuminates when the preset Peak Reference level is reached
in the Fader 2 audio path
• Peak level is selected by the PEAK REFERENCE selector in the Center
Section