API Audio Accessories 7-22-10, Руководство оператора

Страница: 252 / 375

UPDATE FROM START IN WRITE
Use Update from Touch to apply a static position between two points, but not before or
after. For example, touch a fader at the beginning of a verse in a song. In Update and
Update from Touch, move the fader to find the proper level for the track during the verse.
Release the fader at the end of the verse and the last position will be applied throughout
the entire verse.
Update to Next Move: The last positions of the channel
sections are recorded until the Timecode location of the next
previously recorded move:
• The last positions are applied between the point
when recording stopped and the next recorded
move…only the last positions are applied between
the two points
• Recording can be stopped for faders in Update by
releasing the fader
• Recording can be stopped in Write mode by stopping
Timecode or changing the mode/submode
• Update to Next Move is useful when you want to
apply the last position of a control until the next
previously recorded automation move. A fader in
Update can be touched at the beginning of a section
and recording can then be stopped. The last position
will be applied until the next recorded move is
reached.
• Update to Next Move can be used in Update and
Write modes only
• Update to Next Move has no effect when used in
Manual or Read modes
• When Update to Next Move is engaged on at least
one channel section:
o
The Update to Next Move button on the VCP
illuminates in red
o
Channel sections have a dark blue submode
box