API Audio Accessories 7-22-10 Скачать руководство пользователя страница 292

Страница: 292 / 375

26.8.3.6

Copy/Swap Mix Data

To copy or swap mix data, highlight the desired mix and select “Copy/Swap…”

from the Mix Tree Menu. The Copy/Swap window will open.

The Copy/Swap window has four (4) sections:

•

Copy/Swap: Selects channels and the copy or swap function

•

Timecode Range: Selects a Timecode region where data will be copied or
swapped

•

Mapping: Allows automation data to be mapped to other controls

•

Copy and Cancel Buttons: Applies or cancels the selected copy or swap

function

“Copy/Swap…” allows the fader and/or switch data for

the highlighted mix to be copied or swapped between

channels and channel sections.

The copy or swap function can apply to all Timecode

addresses (00:00:00:00 to 23:59:59:XX) or only to a
user defined range of Timecode locations.

A new mix with the copied or swapped data will be
created in the Mix Tree as a result of using this function.

Note: The new mix with the edited data is not

automatically sent to the ACM when it is created
and will not become the active mix. Double–click

the edited mix to send it to the ACM.

Содержание 7-22-10
























































































































































































































































































































































































Результаты поиска

Содержание 7-22-10

Отзывы:

Похожие инструкции для 7-22-10

Бренды по названию

Популярные бренды

API Audio Accessories 7-22-10, Руководство оператора

Результаты поиска

Содержание 7-22-10

Отзывы:

Похожие инструкции для 7-22-10

Бренды по названию

Популярные бренды