API Audio Accessories 7-22-10, Руководство оператора

Страница: 140 / 375

Patch points for 200 Slot modules in the Options Bucket may appear in the patch bay in
various configurations.
17.5.4 LFE Filter Patch Points
17.5.5 Control Room Monitor Insert Patch Points
17.5.6 Stereo, Surround, and Solo Summing Bus Access
LFE FILTER IN 1, 2, 3: LFE low-pass filter inputs
• Feeds the LFE Filter input
• The signals patched to these points are summed together and fed to the
LFE
• Three parallel input patch points (hardwired multiple)
• Fed by Surround to LFE fold down when the 5 TO LFE switch is engaged
on the LFE C/R Insert control panel
STEREO/SOLO SUM BUS ACCESS IN: Stereo and Solo
Summing Bus Access Inputs
• Normalled to the Stereo A, B, C, and SOLO
busses
• Signals patched into the STEREO SUM BUS
ACCESS IN patch points will be added the
bus before the Stereo and Solo ACAs
SURROUND MNTR INSERT SEND (Surround Monitor
Insert Send): 8-channel Control Room Monitor Insert
Send
• L-R, SL-SR, C, LFE, and A-B channels are
supported
• Always active
SURROUND MNTR INSERT RETURN (Surround Monitor
Insert RETURN): 8-channel Control Room Monitor
Insert Return
• L-R, SL-SR, C, LFE, and A-B channels are
supported
• Replaces the Control Room monitor feed
when the C/R INS switch is engaged
The Control Room Insert is Located:
• Post Monitor Source selectors
• Pre Control Room Level control
FLT OUT (Filter Out): Output of the LFE low-pass filter
• The LFE FLTR button must be engaged to activate this output
• May be routed to the Left, Center, and Right monitor feeds when the LFE TO
LCR button is engaged
OPTIONS LINE IN: Options Bucket 200
Slot Input
• Half-normalled to OPTIONS SIDE
CHAIN IN
OPTIONS SIDE CHAIN IN: Options Bucket
200 Slot Side-chain Input
• Half-normalled from OPTIONS
LINE IN
OPTIONS LINE OUT: Options Bucket 200
Slot Line Output
•
NOTE: Patching into the OPTIONS SIDE
CHAIN IN will replace the Options Line
Input as the input to the module’s
detection path (side-chain input)