API Audio Accessories 7-22-10 Скачать руководство пользователя страница 32

Страница: 32 / 375

Aux Sends 7/8 and 9/10 have the same source routing (pre/post, Fader 1/Fader 2).

Talk Back may be added to any Auxiliary Send as needed.

Aux Sends 9/10 may be routed to Multitrack Summing Busses 1-8 to provide additional

summing outputs.

NOTE: When Aux Sends 9/10 are routed to the Multitrack Summing Busses, the feed to

Auxiliary Bus 9/10 from that channel is defeated.

3.5.2.1

Master Auxiliary Mode Switches

There are two (2) Master Auxiliary Mode Switches that are used to control the

source assignments for the ten (10) Auxiliary Sends:

•

PRE: Routes the Auxiliary Send source from Pre the assigned fader

•

FDR2: Routes the Auxiliary Send source from Fader 2

NOTE: The default Auxiliary Send source assignment is Post Fader 1.

The Master Auxiliary Mode switches function as follows:

Only one of the two master modes can be selected at a time.

The Master Auxiliary Mode switches serve as “second function” keys to alter the

function of the Auxiliary Send “1”, “3”, “5”, and “7/8” switches to become source

assignment toggle switches.

IMPORTANT NOTE: The source assignment (Pre/Post and Fader1/Fader2) is the

same for both Stereo Auxiliary Sends (7/8 or 9/10).

To make an Auxiliary Send source assignment, do the following:

•

Press the desired Master Auxiliary Mode switch to activate one of the two

Master Auxiliary modes (indicated by its lit led)

•

Press the “1”, “3”, “5”, and/or “7/8” switch to make the desired source

assignments

Aux Sends are always assigned in four groups:

•

1 and 2

•

3 and 4

•

5 and 6

•

7/8 and 9/10

Each group of Aux Sends may be sourced as follows:

•

Fader 1 or Fader 2 audio path

•

Pre or Post the assigned fader

•

Source assignments may be made:

Locally on the 1068L Module

Via the Recall system

Each group of Aux Sends has a set of indicator led lights that display:

•

The signal source for each of the Aux Send group

•

The On-Off status of the Aux Sends in the group

IMPORTANT NOTE: Only one Stereo Aux Send (7/8 or 9/10) may be

used at a time. In other words, both Stereo Aux

Sends cannot be used simultaneously on the same

channel.

PRE (Pre-fader): Activates the Pre-fader Aux Send source assignment
mode

•

A yellow LED indicator illuminates when active

FDR2 (Fader 2): Activates the Fader 2 Aux Send source assignment

mode

•

A red LED indicator illuminates when active

Содержание 7-22-10
























































































































































































































































































































































































Результаты поиска

Содержание 7-22-10

Отзывы:

Похожие инструкции для 7-22-10

Бренды по названию

Популярные бренды

API Audio Accessories 7-22-10, Руководство оператора

Результаты поиска

Содержание 7-22-10

Отзывы:

Похожие инструкции для 7-22-10

Бренды по названию

Популярные бренды