API Audio Accessories 7-22-10 Скачать руководство пользователя страница 200

Страница: 200 / 375

Note: There is no “undo” for clearing recall settings, so it is suggested that a snapshot is

taken before the settings are cleared.

24.1.8 Read

Console

Note: Clicking the Read Console button will replace the settings in the Recall Settings

window with the current settings from the console.

24.2 Recall System Procedures

For all procedures below:

Open a Vision Project File using the “File” menu in the Main window.

Open the “Project” window using the “View” menu in the Main window.

Click the Snapshot Tab in the Project Window

Open the “Recall Settings” window using the “View” menu in the Main window.

24.2.1 Making Software Channel Output Assignments and Recallable Switch Settings

To make channel output assignments and to set recallable switches using the recall

system, perform the following procedure:

Make sure any needed console settings have been stored in a snapshot before

changing the settings in the Recall Settings Window. (See 23.6.1 Taking a New
Snapshot)

Select the desired channel(s) in the Channel Grid.

Check the desired output assignments and switch settings.

The output assignments will be shown on the Channel Assignment Displays and the
selected recallable switches will be set

Read Console: Reads the current output assignments and recallable
switch settings from the console and updates the Recall Settings

window.

When the “Read Console” button is clicked, the recall system will

“Read” the current states of the recall settings from the console. These

settings can then be stored as part of a snapshot.

Содержание 7-22-10
























































































































































































































































































































































































Результаты поиска

Содержание 7-22-10

Отзывы:

Похожие инструкции для 7-22-10

Бренды по названию

Популярные бренды

API Audio Accessories 7-22-10, Руководство оператора

Результаты поиска

Содержание 7-22-10

Отзывы:

Похожие инструкции для 7-22-10

Бренды по названию

Популярные бренды