API Audio Accessories 7-22-10 Скачать руководство пользователя страница 231

Страница: 231 / 375

MASTER FADERS

26.3.1.5

1068L Input Modules

The 1068L Input module contains the fader and MUTE for the

Fader 2 audio path. It also contains all of the automated switches
for the entire channel strip (Inserts, EQ Bypass, Auxiliary Send

On/Off).

The Input modules are connected to their associated Fader Control

Modules for automation control.

Note: The Fader 1 mute button on the 1068L module is not

part of the automation system, but is activated by the

automated mute on the fader module. When engaged,

it is not disengaged but the automation system.

The Stereo and Surround Program Master Faders and Group Masters use

Master Fader modules.

Master Fader modules have all the same features as Channel Fader

modules, except there is SEL button since there are no channel sections

to select.

All Master Faders are in the Fader 1 channel section group.

Содержание 7-22-10
























































































































































































































































































































































































Результаты поиска

Содержание 7-22-10

Отзывы:

Похожие инструкции для 7-22-10

Бренды по названию

Популярные бренды

API Audio Accessories 7-22-10, Руководство оператора

Результаты поиска

Содержание 7-22-10

Отзывы:

Похожие инструкции для 7-22-10

Бренды по названию

Популярные бренды