API Audio Accessories 7-22-10 Скачать руководство пользователя страница 265

Страница: 265 / 375

26.7

Vision Control Panel

The Vision Control Panel (VCP) is the user interface for the Automation Control Module (ACM).

As such it provides all essential automation controls, a menu of software controls, and display of

Timecode and automation information.

Vision Control Panel (VCP): The

Vision Control Panel is the central

hardware control panel for
automation.

The VCP allows operation of most
automation features without the

need to access the computer and

software. Used with the software, it
provides a flexible means of

accessing automation functions at

the console as well as on the

computer.

Creating automated mixes starts

with the VCP by selecting “New Mix”
from the VCP menu.

The VCP menu also allows PC
window control, system parameters

to be set, Groups to be burnt to ACM

memory, recall settings to be

cleared, and firmware versions to be
viewed.

The Vision Control Panel has a
backlit 128X64 LCD display. The

main display shows the current

Timecode, fader levels, system
status, ACM menus, and system

messages.

The VCP has 5 X 6 matrix of 30
buttons used for automation control.

The VCP panel is located next to the
master faders in the Center Section.

Содержание 7-22-10
























































































































































































































































































































































































Результаты поиска

Содержание 7-22-10

Отзывы:

Похожие инструкции для 7-22-10

Бренды по названию

Популярные бренды

API Audio Accessories 7-22-10, Руководство оператора

Результаты поиска

Содержание 7-22-10

Отзывы:

Похожие инструкции для 7-22-10

Бренды по названию

Популярные бренды