Amazone Cataya 3000 Super, Руководство по эксплуатации

Страница: 84 / 252

Layout and function
84
Cataya Super BAH0087-11 01.19
Standardised calibration value [pul./100m]
for Cataya Super with star wheel
1250 [pul./100m]
313 [pul./100m]
Fig. 78
On fields with more or less slip, the calibration value [pulses/100 m] deviates from the standardized
calibration value. This also changes the number of crank turns in the tables (Fig. 77 and Fig. 78).
Before starting work, carry out a calibration run on the field as described in the "" operating
manual.
If the calibration value you have determined differs from the standardized calibration value
[pulses/100 m], recalculate the number of crank turns for calibrating the seed rate as follows.
Crank turns = Crank turns (from table) x
Determined calibration value [pul./100 m]
Calibration value (from the table)
Then calibrate the seed rate with the calculated number of crank turns.
Example:
Seed drill: ................................................................................... Cataya 3000
Working width: ........................................................................... 3.0 m
Crank turns (table value, Fig. 75) .............................................. 16.25
Pul./100 m (calibration value, standardized, Fig. 77) ................ 625 (pul./100 m)
Pul./100 m (calibration value, determined): ............................... 595 (pul./100 m)
Crank turns = 16.25 x
596 [pul./100 m]
= 15.5
625 [pul./100 m]
Calibrate the seed rate at 15.5 crank turns.