Amazone Cataya 3000 Super, Руководство по эксплуатации

Страница: 219 / 252

Cleaning, maintenance and repairs
Cataya Super BAH0087-11 01.19
219
12.5.6 Conversion of a tramline metering wheel to a metering wheel
The gear wheels on the countershaft drive the gear wheels of the tramline metering wheels.
If a tramline metering wheel should be converted to a metering wheel, the gear wheel pairing on the
countershaft and on the seeding shaft are removed.
If the tramline metering wheel should only be converted for a short time, to be used again as a
tramline metering wheel on the next field, the gear wheel on the countershaft is simply shifted until it is
no longer meshed with the gear wheel on the seeding shaft.
12.5.6.1 Conversion of a tramline metering wheel to a metering wheel
by shifting the gear wheel on the countershaft
1. Loosen the hexagon socket screw
(Fig. 287/2) of the gear wheel on the
countershaft. Shift the gear wheel
(Fig. 287/1) on the countershaft until the
gear wheel pairings no longer touch.
2. Tighten the hexagon socket screw
(Fig. 287/2) in the groove of the lay shaft
without tension, until axial shifting of the
gear wheel is ruled out.
Fig. 287
3. Screw the hexagon socket screw
(Fig. 288/2) into the seeding shaft groove
and then loosen by ½°rotation, so that the
gear wheel (Fig. 288/1) can move on the
seeding shaft with a slight twist angle.
4. Check whether the metering wheel is
picked up by the seeding shaft.
Fig. 288