Amazone Cataya 3000 Super, Руководство по эксплуатации

Страница: 35 / 252

General safety instructions
Cataya Super BAH0087-11 01.19
35
2.16.4 Mounted implements

When mounting, the mounting categories on tractor and
implement must be compatible or an adapter must be used.

Observe the manufacturer's instructions.

Before mounting or dismounting implements on the 3-point hitch,
put the operating equipment to a position in which accidental
raising or lowering is impossible.

There is a danger of crushing or shearing injury in the area of the
three-point linkage.

The implement may be transported and towed only by the
tractors intended for this purpose.

There is a risk of injury when implements are coupled to and
uncoupled from the tractor.

Do not step between tractor and implement when operating the
external controls for the 3-point hitch.

There is a danger of crushing and shearing injury when
operating the support devices.

When mounting implements at the front or rear of a tractor, do
not exceed
o the permissible total tractor weight

the permissible tractor axle loads

The permissible load-bearing capacities of the tractor tyres.

Observe the max. payload of the mounted implement and the
permissible axle loads of the tractor.

Always ensure that the tractor lower links are adequately locked
against sideways movement before transporting the implement.

When travelling on public roads,

the control lever for the tractor lower links must be secured
against lowering

the control terminal must be switched off.

Move all equipment into the transport position before travelling
on the road.

Any mounted implements and ballast weights affect the
handling, steering and braking of the tractor.

The tractor front axle must always be loaded with at least 20 %
of the empty tractor weight to ensure sufficient steering power.
Apply front weights if necessary.

Repair, maintenance and cleaning work or rectifying
malfunctions must always only be carried out with

the ignition spanner removed

and the control terminal switched off.

Leave safety devices attached and always put them in the
protective position.