Allen-Bradley Kinetix 5100 2198-E1004-ERS, Руководство пользователя, Страница: 45 / 500

Rockwell Automation Publication 2198-UM004A-EN-P - October 2019
45
Connector Data and Feature Descriptions
Chapter 3
Table 21 - Motor Feedback (MF) Connector Pinout
Figure 23 - Pin Orientation for 15-pin Motor Feedback (MFB) Connector
MFB Pin Signal Description MFB Pin Signal Description
1
SIN+
AM+
Sine differential input+
AM+ differential input+
9 – Reserved
2
SIN–
AM–
Sine differential input–
AM– differential input–
10
DATA–
IM–
Data differential input –
Index pulse–
3
COS+
BM+
Cosine differential input+
BM+ differential input+
11 TS Motor thermal switch (normally closed)
(1)
4
COS–
BM–
Cosine differential input–
BM– differential input–
12 S1 Single-ended 5V Hall effect commutation
5
DATA+
IM+
Data differential input +
Index pulse+
13 S2 Single-ended 5V Hall effect commutation
6 ECOM Common 14 EPWR_5V
(2)
Encoder power (+5V)
7 EPWR_9V
(2)
Encoder power (+9V) 15 – Reserved
8 S3 Single-ended 5V Hall effect commutation
(1) Not applicable unless motor has integrated thermal protection.
(2) Determine which power supply your encoder requires and connect to only the specified supply. Do not make connections to both.
ATTENTION:
To avoid damage to components, determine which power supply
your encoder requires and connect encoder power to either the 5V or 9V supply,
but not both.
IMPORTANT
Drive-to-motor power and feedback cable length must not exceed 50 m
(164 ft) or 30 m (98 ft) depending on feedback type. System performance was
tested at these specifications and also applies when meeting CE requirements.
Pin 11
Pin 6
Pin 15
Pin 1
Pin 10
Pin 5