Allen-Bradley Kinetix 5100 2198-E1004-ERS, Руководство пользователя, Страница: 106 / 500

106
Rockwell Automation Publication 2198-UM004A-EN-P - October 2019
Chapter 5
Use the Keypad Interface
Display Low Byte, High Byte, and Negative Values
In the real-time data display, all values are scrolled and displayed as decimal or
hexadecimal. On the parameter editor screen, the value range can be shown in
one of two ways:
• The real-time value is ‘short’ or 16 bits (can be shown in one screen).
• The real-time value is ‘long’ or 32 bits (must be shown in two screens). The
first screen is the high byte and the second screen is the low byte. In these
instances, use the
key to move between screens.
How the panel displays 16-bit and 32-bit values is shown in Table 61 .
Parameter values are displayed as shown in the Knowledgebase article 1090034 ,
Kinetix 5100 Servo Drive Parameter Data and Fault Codes.
Table 61 - 16-Bit and 32-Bit Display Formats
Example of the displayed value Description
(Dec)
16 bits
If the value is positive 12345, the display shows 12345
in decimal format.
(Hex)
If the value is 0x011F, the display shows 0x011F in
hexadecimal format; the highest digit is not shown.
(Dec high)
32 bits
If the value is (positive) 1230478900, the display for
the high byte shows 12304, and display for the low
byte shows 78900, both in decimal format.
(Dec low)
(Hex high)
If the value is 0x001F0000, the display for the high
byte shows h001F, and display for the low byte shows
L0000 in hexadecimal format.
(Hex low)