Aerotech UNIDEX 600 Series, Руководство пользователя

Страница: 181 / 354

Setup Wizard U600 User’s Guide
12-2
Aerotech, Inc.
Version 1.4
To access a description of the required information for each page of the setup wizard,
press the Help button (on each page).
12.2. Axis Names and Number
Enter the number of axes present in your system and press the <ENTER> key or tab out
of the field. This will tell the Wizard how many axes it must prompt you to configure.
Select the desired units (English inches or Metric millimeters) that you would like to use
when entering values into the Wizard.
Enter the desired axis name (see Section 12.2.1.) for each axis.
Selecting ‘Next’ will advance you to the next Wizard configuration screen, ‘Back’ will
take you to the previous Wizard screen, ‘Cancel’ will exit the Wizard without saving any
changes to the axis configuration.
Figure 12-2. The Axis Name/Number Configuration Screen
12.2.1. Axis Names
This allows the default axis names:
X, Y, Z, U, A, B, C, D, x, y, z, u, a, b, c, d
to be changed by the user to an axis name of their choice, with a few exceptions. All
reserved key words and key letters may not be used as axis names. Key letters are those
used for F, G, and M codes, etc. Key words are those used for commands, such as BIND,
FOR, IF, etc. Since there is an axis named X and x, the case of axis name is significant.
Axis names are limited to 32 characters, maximum.
If you reassign an axis name, you must exit the MMI600 and restart it for the change
to take effect.