Aerotech UNIDEX 600 Series, Руководство пользователя

Страница: 175 / 354

AerPlotIO U600 User’s Guide
10-2
Aerotech, Inc.
Version 1.4
To add a trace:
Double click on the trace label (i.e., Trace 1). This will display a screen that will allow
you to select which binary input, binary output, register input, or register output to
display. When trace has been added, the name will be changed from Trace X to the name
of the binary input/output or register input/output that was chosen to be displayed for that
trace.
When register inputs or register outputs are displayed, the actual value of the register
input/output is not displayed. If a register input/output does not change value, a 1 is
displayed. If a register input/output changes, a 0 will be displayed for one millisecond to
represent the fact that the register input/output changed. The value of the register
input/output at any given point in time can be determined using the cursors.
File Menu - Allows the user to Save, Export, Load, or Print the Plot File
Trigger Menu -
Allows the user to collect one set of data, collect data
continuously, halt continuous data collection, update the
conditional triggering, and update the sample rate
Collect Menu - Allows the user to specify how many points to collect
Graph Options -
Allows the user to use graph lines, mark data points, change the
time scale, or zoom the graph
Tools -
Allows the user to control whether the status and the cursors
window can be seen
Help - Allows the user to activate the U600 help file
To set up conditional triggering:
In order to enable conditional triggering, the conditional triggering enabled check box
must be checked. 16 binary inputs, 16 binary outputs, a register input, or a register output
may be used for conditional triggering.