Aerotech UNIDEX 600 Series, Руководство пользователя

Страница: 79 / 354

AerDebug U600 User’s Guide
4-10
Aerotech, Inc.
Version 1.4
4.4.1.6. ConfigRead - Read an Axis Configuration From a File
Axes may be configured quickly, once a configuration file has been created, preferably by
the ConfigWrite command (the file format is documented in the UNIDEX 600 Series
Library Manual). The ConfigRead command will read the configuration of the current
axis from the file, as indicated by the AerDebug prompt and configure the axis.
The file will be read from the current directory unless a path is provided in the filespec. A
file extension must be specified; an .INI file extension is not assumed.
CONFIGREAD ( filespec )
where,
filespec Filespec specifies the name of the configuration file to read the
axis configuration from.
4.4.1.7. ConfigWrite - Write an Axis Configuration to a File
After initially configuring the axes manually, the configuration may be saved to a
configuration file for recalling that configuration at a later time. The ConfigWrite
command will save the configuration of the current axis, as indicated by the AerDebug
prompt, for later use by the ConfigRead command to restore that configuration, after
power-up or resetting the UNIDEX 600 Series controller.
The file will be written to the current directory unless a path is provided in the filespec.
The file will have the file extension specified by the filespec. A new or existing file may
be specified. The same file may contain configurations for multiple axes.
CONFIGWRITE ( filespec )
where
filespec Filespec specifies the name of the configuration file to
write to.