Aerotech UNIDEX 600 Series, Руководство пользователя

Страница: 171 / 354

AerPlot3D U600 User’s Guide
9-2
Aerotech, Inc.
Version 1.4
The read/write data file menu selection allows the plot to be saved to a data file that may
be reloaded at a later time.
9.1.1.1. Writing a Plot Data File
To write data to a file,
1. Select the read/write data file menu selection
2. Enter a filename or select the Browse button to overwrite an existing file
3. Select the Write button
4. Select the Start button from the menu on the main window
5. When data collection is complete, select “Stop Write”
6. Select the X box in the upper right of the Data File window to close it
9.1.1.2. Reading and Displaying a Plot Data File
To read data from a file,
1. Select the read/write data file menu selection
2. Enter a filename or select the file via the Browse button
3. Select the Read button
4. Select the X box in the upper right of the Data File window to close it
The Default Setup menu selection will restore the AerPlot3D default configuration.
The Exit menu selection will exit AerPlot3D.
9.1.2. Plot Type Menu
The Plot Type menu allows you to select either 2D plotting or 3D plotting. This also
defines the number of axes that may be selected for display via the Axis Select selection
of the Setup menu.
9.1.3. Setup Menu
The Setup menu has 4 selections.
The Axis Select menu will display the axis select window (shown in Figure 9-2). The
number of axes that may be selected is determined by the Plot Type menu selection. Each
axis may have its position feedback, position command, position error, velocity feedback,
velocity command, velocity error, torque, or acceleration selected for display.
Figure 9-2. The Setup Screen of AerPlot3D