Aerotech UNIDEX 600 Series, Руководство пользователя

Страница: 71 / 354

AerDebug U600 User’s Guide
4-2
Aerotech, Inc.
Version 1.4
4.2. The Screen
The AerDebug screen is divided into three parts: DATA, HELP, and STATUS. Refer to
Figure 4-1.
The DATA screen has a black background and contains the prompt line as well as the last
twenty or so data lines printed. The user enters commands on the prompt line and views
data returned by the command. The command on the lowest prompt line is the current
command. Text on the DATA screen typed by the user appears in green, while text typed
by AerDebug in response to commands is in red. When the data on the DATA screen
exceeds the height of the screen, the screen scrolls up and the topmost lines are discarded.
The HELP screen has a BLUE background and is normally blank. However, if the user
enters “?”, then the requested help data is printed to the screen. This help data will remain
on the screen until the next set of help data is requested. The type of help data returned
depends on the text preceding the “?” on the command line.
The STATUS screen consists of a single line at the bottom of the screen. Its purpose is to
indicate important conditions to the user and to echo partial command matches.
Figure 4-1. AerDebug Screen
Data Screen
Help Screen
Status Screen