ADS Intrinsically-Safe TRITON+, Инструкция по установке, эксплуатации и обслуживанию, Страница: 211 / 424

6-24 ADS Manual
15 fps option for this parameter. If the location is downstream
from a pump station and displays rapid changes in velocity
from reading to reading, ADS also recommends changing the
Maximum Velocity setting from Auto to a setting slightly
above the maximum recorded velocity.

Transmit Frequency Select the frequency at which to
transmit the signal. ADS recommends leaving the default
setting (
High ) selected.

Gain
This value represents the factor applied to raw velocity
(RAWVEL entity in Qstart ) to determine average velocity and
to calculate quantity for the Flow 1(2) device. Qstart does not
apply Gain to the velocity readings reported in Diagnostics ,
where the raw velocity readings are used for comparison
against the manual measurements.

Cross Check Gain Enter the value by which to multiply raw
velocity readings in the monitor to determine average velocity
for comparison purposes in the monitor.

Store Data
Select this checkbox to ensure the monitor logs
the velocity data to memory. This option is selected by default.

Advanced
Select this button to access the Advanced
Parameters dialog.
Advanced Parameter s dialog