ADS Intrinsically-Safe TRITON+, Инструкция по установке, эксплуатации и обслуживанию

Страница: 210 / 424

Configuration and Activation 6-23

Velocity Direction
Select one of the following options that
reflects the general direction of the flow at the monitoring point
and position of the velocity sensor.
The default is Forward.

Bidirectional
Choose this option for monitoring points
that potentially experience reverse flows. The Peak
Combo Sensor typically is positioned facing upstream into
the flow. Choosing this ensures the monitor analyzes both
positive and negative values returned from the velocity
sensor.

Forward
Choose this option for monitoring points where
reverse flows are not expected and to ensure the monitor
only analyzes positive values returned from the velocity
sensor. The Peak Combo Sensor typically is positioned
facing upstream into the flow. This is the most common,
and the default, option for selection. ADS recommends
using this setting for most monitoring applications.
Forward is the default selection for Velocity Direction .

Backward
Choose this option for monitoring points at
which the Peak Combo Sensor has been positioned facing
downstream and to ensure the monitor only analyzes flows
moving
away from the face of the sensor. One application
in which this would be the preferable option would be for
measuring velocity in an outgoing line following two
incoming lines in the manhole.

Backward Bidirectional Choose this option when the
Peak Combo Sensor is installed facing downstream and to
ensure the monitor analyzes flows moving both away from
and toward the face of the sensor. This option would be
beneficial, for example, when using a weir to measure
overflows with the potential of river intrusion.

Maximum Velocity
Select the maximum expected velocity
that will occur at the site for the monitor to use in fine-tuning
the velocity data. The default setting is
Auto , which serves to
optimize the range and resolution of the velocity data samples
to match the characteristics of the flow. However, if the
velocity readings at the location measure at least 10 feet per
second (fps) on a regular basis, ADS recommends choosing the