ABB IRB 1200, Руководство по эксплуатации продукта

Страница: 639 / 906

Replacing the mechanical stop
Use these procedures to remove the axis-1 mechanical stop.
Preparations before removing the mechanical stop
Note Action
Jog the robot to a position where the
mechanical stop is most easily accessed. 1
DANGER
Turn off all:
• electric power supply
• hydraulic pressure supply
• air pressure supply
to the robot, before entering the robot
working area.
2
CAUTION
For robots with protection type Clean
Room
For robots with food grade lubrication
For robots with protection type Hygienic
Always cut the paint with a knife and grind
the paint edge when disassembling parts
of the robot! See
Cut the paint or surface
on the robot before replacing parts on
page 158
.
3
Replacing the axis-1 mechanical stop
Note Action
DANGER
Make sure that all supplies for electrical
power, hydraulic pressure, and air pressure
are turned off.
1
CAUTION
For robots with protection type Clean
Room
For robots with food grade lubrication
For robots with protection type Hygienic
Always cut the paint with a knife and grind
the paint edge when disassembling parts
of the robot! See
Cut the paint or surface
on the robot before replacing parts on
page 158
.
2
Continues on next page
Product manual - IRB 1200 639
3HAC046983-001 Revision: S
© Copyright 2014 - 2021 ABB. All rights reserved.
4 Repair
4.5.3 Replacing the axis-1 mechanical stop
Continued