
Parameters 189
Selects Ext2 frequency reference source 1.
Two signal sources can be defined by this parameter and
) applied to the two signals
creates an Ext2 reference. See diagram at
.
Zero
None.
0
AI1 scaled
(see page
).
1
AI2 scaled
(see page
).
2
EFB ref1
).
8
EFB ref2
).
9
Motor potentiometer
(output of the motor
potentiometer).
15
PID
(output of the process
PID controller).
16
Frequency input 1
(when DI3 or DI4 is used as a
frequency input).
17
Control panel (ref
saved)
Panel reference (
, see page
saved by the control system for the location where the
control returns is used as the reference.
18
Control panel (ref
copied)
Panel reference (
) for
the previous control location is used as the reference
when the control location changes if the references for the
two locations are of the same type (eg
frequency/speed/torque/PID); otherwise, the actual signal
is used as the new reference.
19
Integrated panel (ref
saved)
See above Control panel (ref saved).
20
Integrated panel (ref
copied)
See above Control panel (ref copied).
21
Frequency input 2
(when DI3 or DI4 is used as a
frequency input).
22
).
-
Selects Ext2 frequency reference source 2.
For the selections, and a diagram of reference source
selection, see parameter
No.
Name/Value
Description
Default
FbEq 16
Ext1 -> Ext2
t
Reference
Ext1 reference
Ext2 reference
Active reference
Inactive reference
Ext1 -> Ext2
Ext1 reference
Ext2 reference
Active reference
t
Inactive reference
Reference
ACS180 FW.book Page 189 Tuesday, March 9, 2021 2:25 PM