3Com 3C63400-3AC-C - PathBuilder S700 Switch, Справочное руководство

Страница: 120 / 272

106 C
HAPTER
5: C
ONFIGURING
P
ATH
B
UILDER
S700 M
ODULES
, P
ORTS
,
AND
A
PPLICATIONS
Figure 72 System Administration Menu
Specifying General
System Information
General system information includes the following:
Shelf name —Change the name of the node.
Customer name —Change or enter the customer name.
Phone number —Change or enter the phone number.
Maintenance contact —Change or enter the maintenance contact.
Location —Change or enter the location.
Auto logout time —Change the logout time (1-99 minutes).
Password —Change the password. The default is
password
.
To specify or change general system information, follow these steps:
1 From the System Administration menu, select [1] General System Information to
display the General System Information menu shown in Figure 73. This menu
displays the current system information and provides options that allow you to
change the current settings.
2 Select the option corresponding to the setting you want to change. A prompt
appears at the bottom of the screen.
3 Enter the new setting.
4 Repeat steps 2 and 3 for any other settings you want to change.
5 Select [8] Previous Menu to return to the System Administration menu.
For information about the options related to initial configuration (setting
communication parameters, configuring in-band management, setting the time
and date, changing the default password, and taking over a read-write session),
see Chapter 3.