manualshive.com logo in svg

ZyXEL Communications XGS2220 Series, User Manual

Get the best out of your ZyXEL Communications XGS2220 Series with our comprehensive User Manual. Download it for free from manualshive.com and explore all the features and settings of this exceptional product. Maximize your device's potential and ensure a smooth operating experience with our detailed and easy-to-follow manual.

Share
Download
background image

XGS2220 Series User’s Guide

92

DHCP 

Server 

Guard

This link takes you to a screen where you can specify whether ports are trusted or untrusted ports 
for DHCP packets.

Static Routing

Click the link to unfold the following sub-link menu.

IPv4 Static 

Route

This link takes you to a screen where you can configure IPv4 static routes. A static route defines 
how the Switch should forward traffic by destination IP address and subnet mask. 

IPv6 Static 

Route

This link takes you to a screen where you can configure IPv6 static routes. A static route defines 
how the Switch should forward traffic by destination IP address and prefix length. 

SECURITY

AAA

Click the link to unfold the following sub-link menu.

RADIUS 

Server 

Setup

This link takes you to a screen where you can configure your RADIUS (Remote Authentication Dial-
In User Service) server settings for authentication.

 

Server 

Setup

This link takes you to a screen where you can configure your (Terminal Access Control-
ler Access Control System Plus) server settings for authentication.

AAA Setup

This link takes you to a screen where you can configure authentication, authorization and 
accounting services through external servers. The external servers can be either RADIUS or 
 (Terminal Access Controller Access Control System Plus).

Access Control Click the link to unfold the following sub-link menu.

Service 

Access 

Control

This link takes you to a screen where you can decide what services you may use to access the 
Switch.

Remote 

Managem

ent

This link takes you to a screen where you can specify a group of one or more “trusted computers” 
from which an administrator may use a service to manage the Switch. 

Account 

Security

This link takes you to a screen where you can configure account security settings on the Switch.

ACL

Click the link to unfold the following sub-link menu.

Classifier

This link takes you to screens where you can configure the Switch to group packets based on the 
specified criteria.

Policy Rule

This link takes you to a screen where you can configure the Switch to perform special treatment 
on the grouped packets.

Anti-Arpscan

This link takes you to screens where you can enable anti-arpscan on the Switch and ports, and 
view the port state. You can also create trusted hosts, view blocked hosts and unblock them.

BPDU Guard

This link takes you to screens where you can enable BPDU guard on the Switch and ports, and 
view the port state.

Storm Control

This link takes you to a screen to set up broadcast filters.

Errdisable

This link takes you to a screens where you can view errdisable status and configure errdisable set-
tings in CPU protection, errdisable detect, and errdisable recovery.

IPv4 Source 
Guard

Click the link to unfold the following sub-link menu.

IP Source 

Guard

This link takes you to screens where you can configure filtering of unauthorized DHCP and ARP 
packets in your network. 

DHCP 

Snooping

This link takes you to screens where you can view DHCP snooping database details and configure 
DHCP snooping settings on ports or VLANs. You can use DHCP snooping to filter unauthorized 
DHCP packets on the network and to build the binding table dynamically.

ARP 

Inspection

This link takes you to screens where you can view ARP inspection status, and configure ARP 
inspection settings on ports or VLANs. You can use ARP inspection to filter unauthorized ARP pack-
ets on the network.

IPv6 Source 
Guard

Click the link to unfold the following sub-link menu.

IPv6 Static 

Binding

The link takes you to screens where you can view IPv6 static binding status and manually create 
IPv6 source guard static binding entries.

Table 29   Navigation Panel Links (Standard Mode) (continued)

LINK

DESCRIPTION

Summary of Contents for XGS2220 Series
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for XGS2220 Series

3Com SUPERSTACK 3 3226 Datasheet preview
SUPERSTACK 3 3226
Brand: 3Com Pages: 5
3Com LANPLEX 2500 Operation Manual preview
LANPLEX 2500
Brand: 3Com Pages: 139
3Com CoreBuilder 7000 Installation & Start?Up Manual preview
CoreBuilder 7000
Brand: 3Com Pages: 150
3Com CoreBuilder 7000 Operation Manual preview
CoreBuilder 7000
Brand: 3Com Pages: 264
3Com 4007 Command Reference Manual preview
4007
Brand: 3Com Pages: 574
3Com 3CRUS2475 24 User Manual preview
3CRUS2475 24
Brand: 3Com Pages: 333
3Com SUPERSTACK 3 3226 Getting Started Manual preview
SUPERSTACK 3 3226
Brand: 3Com Pages: 70
3Com OfficeConnect 3C16790C User Manual preview
OfficeConnect 3C16790C
Brand: 3Com Pages: 18
3Com 5500-EI PWR Reference Manual preview
5500-EI PWR
Brand: 3Com Pages: 1314
3Com SuperStack II Switch 1100 User Manual preview
SuperStack II Switch 1100
Brand: 3Com Pages: 62
Radial Engineering Gold Digger User Manual preview
Gold Digger
Brand: Radial Engineering Pages: 8
Radial Engineering BigShot ABY User Manual preview
BigShot ABY
Brand: Radial Engineering Pages: 2
SMC Networks PF2A7 Series Operation Manual preview
PF2A7 Series
Brand: SMC Networks Pages: 43
Eaton 9476-ET Instruction Manual preview
9476-ET
Brand: Eaton Pages: 43
Fairchild FSDH321 Manual preview
FSDH321
Brand: Fairchild Pages: 20
Dahua DH-PFS3206-4P-120 User Manual preview
DH-PFS3206-4P-120
Brand: Dahua Pages: 19
Cable Electronics HSW44C Plus Instruction Manual preview
HSW44C Plus
Brand: Cable Electronics Pages: 16
hager EHN010 Installation And Instruction Manual preview
EHN010
Brand: hager Pages: 6

Brands by name

Popular brands

Load more brands