Chapter 57 VLAN Isolation
XGS2220 Series User’s Guide
391
Figure 290
SWITCHING > VLAN Isolation
The following table describes the labels in this screen.
57.2.1 Add/Edit a VLAN Isolation Rule
Click
Add/Edit
, or select an entry and click
Add/Edit
in the
SWITCHING
>
VLAN Isolation
screen to display
this screen.
Figure 291
SWITCHING > VLAN Isolation > Add/Edit
The following table describes the labels in this screen.
Table 214 SWITCHING > VLAN Isolation
LABEL
DESCRIPTION
Index
This is the index number of the rule.
Active
This shows whether this rule is activated or not.
Name
This is the descriptive name for this rule.
VLAN ID
This is the VLAN to which this rule is applied.
Promiscuous Ports
This shows the ports that can communicate with any ports in the same VLAN.
Select an entry’s check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Add/Edit
Click
Add/Edit
to add a new entry or edit a selected one.
Delete
Click
Delete
to remove the selected entries.
Table 215 SWITCHING > VLAN Isolation > Add/Edit
LABEL
DESCRIPTION
Active
Enable the switch button to enable VLAN Isolation in a VLAN.
Name
Enter a descriptive name (up to 32 printable ASCII characters except [ ? ], [ | ], [ ' ], [ " ] or [ ,
]) for identification purposes.
VLAN ID
Enter a VLAN ID from 1 to 4094. This is the VLAN to which this rule applies.
Promiscuous Ports
Enter the number of the ports that can communicate with any ports in the same VLAN.
Other ports belonging to this VLAN will be added to the isolation list and can only send and
receive traffic from the ports you specify here.
