Chapter 38 Port Setup
XGS2220 Series User’s Guide
264
C
HAPTER
38
Port Setup
38.1 Port Setup
Use this screen to configure Switch port settings. Click
PORT
>
Port Setup
in the navigation panel to
display the configuration screen.
Figure 187
PORT > Port Setup
The following table describes the labels in this screen.
Table 129 PORT > Port Setup
LABEL
DESCRIPTION
Port
This is the port index number.
*
Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row first to set
the common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
Active
Select this check box to enable a port. The factory default for all ports is enabled. A port must
be enabled for data transmission to occur.
Name
Type a descriptive name that identifies this port. You can enter up to 128 printable ASCII
characters except [ ? ], [ | ], [ ' ] or [ " ].
Note: Due to space limitations, the port name may be truncated in some Web
Configurator screens.
