Chapter 61 ARP Setup
XGS2220 Series User’s Guide
410
The following table describes the related labels in this screen.
Table 228 NETWORKING > ARP Setup > Static ARP > Add/Edit
LABEL
DESCRIPTION
Active
Enable the switch button to activate your rule. You may temporarily deactivate a rule without
deleting it by clearing this check box.
Name
Enter a descriptive name (up to 32 printable ASCII characters except [ ? ], [ | ], [ ' ], [ " ] or [ , ])
for identification purposes.
IP Address
Enter the IP address of a device connected to a Switch port with the corresponding MAC
address below.
MAC Address
Enter the MAC address of the device with the corresponding IP address above.
VID
Enter the ID number of VLAN to which the device belongs.
Port
Enter the number of port to which the device connects.
Apply
Click
Apply
to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the
Save
link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Clear
Click
Clear
to clear the fields to the factory defaults.
Cancel
Click
Cancel
to not save the configuration you make and return to the last screen.
